Hot Melt Adhesives for Edge Banding (EVA, PUR)

Application:
for edge banding of fiberboard, particleboard, plywood, blockboard, fireproof board, etc., and wood strips, acrylic, PVC, ABS and other plastics.

Properties:
good glue wetting performance; high initial viscosity; good thermal stability; good fluidity; no drawing; high and low temperature resistance; boiling resistance; excellent weather resistance.

Storage:
Store in a dry, cool place below 40ºC for 360 days.

Points to note:
Do not mix with other adhesives.
The hot melt glue groove must be covered tightly to prevent sundries from falling into and affecting the performance of the glue.
Since hot melt adhesive must be heated when used, personal protective equipment should be worn.

Recommended "first-in-first-use" cycle use.