Hot Melt Pressure Sensitive Adhesive For Porous Film Tape

Performance requirements:

1. Moderate stripping force

2. Good wettability

3. High shear strength

Storage:

Store in a dry, cool place below 40ºC for 24 months.

Points to note:

Do not mix with other adhesives. The operating temperature cannot exceed 200°C

The hot melt glue groove must be covered tightly to prevent sundries from falling into and affecting the performance of the glue.

Since hot melt adhesive must be heated when used, personal protective equipment should be worn.

Recommended "first-in-first-use" cycle use.